AUTO RESIN FINISHING DISPENSING SYSTEM
Introduction:

Stable resin finishing solution is a very important factor to
control the quality of textile goods. However, inaccuracy and unreliability of tranditional manaual method happens day by day. Auto resin finishing dispensing system is designed to reach this standard. And also can reduce the unnecessary waste and keep solution fresh.
  
    Benefits:

1. Increase Accuracy:
　Computer controlled and connect the load-cell. It can reach the required accuracy.
2. Eliminate mistake, Improve quality:
　Operator no need to calculate the recipe, make-up solution.
    Maintains high production quality standards
3. Cost saving:
　Economical chemical usage by elimination of waste. 10% saving are expected.
4. Efficiency:
　Can using air membraned pump to deliver the chemicals to doing unit. It makes simple
    engineering plant.
5. Environment improve:
　Compact design and limited space occupied. The system can bring the environment 
    cleaning and safety.
6. Management report:
　Provide daily and monthly consumption statistics report. Detailed weighing record can 
    be a part of procedure management.

    Compact design structure,
    easy to install.		 Independent dispensing and mixing tank, Speed-Up making up      Selectable Auto/Manual
     operation

   Clean all tanks and pipes after
   weighing automatically.		      Display every dispensing and
      result on screen.		    Transfer make-up solution to
   side tank by individual pipe,
   up to 4 stenters.

Sophisticated circuit design
　   Features

　  1. Eliminate the writing and calculation errors by human.  
　  2. Digitalis display of make-up process
　  3. Using a pair of load-cell can control he weighing accuracy
　  4. Unique three-tanks design. Speed up solution make-up
　  5. Clean the tube automatically after dispensing
　  6. Provide the weighing report as well as consumption report.
　  7. Recipe make-up completely and transfer to side tank automatically.
　  8. One system can serve multi-machine.
　  9. Additional PLC are available beside each machine to execute adding solution, Cleaning tank and drain 
          automaticall. (Optional)
　10. Easy operation and maintain.

PREPARE BY CUSTOMER

      　　This system apply for stenter and dryer in finishing process. Transfer solution to side tank beside stenter 
         directly after precise make-up. One system can supply up to 4 stenters. 
　　Specifications
No. of chemical 4∼30
Dispensing valve Pneumatic valve (Material: PVC or SUS304)
Chemical supply Air diaphragm pump or high position storage tank
Control By PLC
Solution supply Detect the level of side tank and supply automatically
Material Stainless steel fram with impacted PVC board.
Computer for recipe station IBM compatible PC (prepare by customer)
Software function Auto make-up consumption report, network operation
Utility Water inlet: 1"、Power: 380V, 3 Phase, 50/60Hz, Air: 5kg/cm2
Dimensions/Weights 1170cm(L)×1090cm(D)×1870cm(H)／400kgs approximately

(Specifications are subject to change without notice)